surface highspeed colors

[Jaz]

I organize surfaces and solids by colors. During geometry selection in the High Speed toolpaths MasterCam shades all the unselected surfaces and solids gray then yellow when selected. Is there any way to NOT have all unselected surfaces be just gray?

[crazy^millman]

49 minutes ago, Jaz said:

I organize surfaces and solids by colors. During geometry selection in the High Speed toolpaths MasterCam shades all the unselected surfaces and solids gray then yellow when selected. Is there any way to NOT have all unselected surfaces be just gray?

Nope, but that has been requested. You get what you get for now. Have Solids and surfaces together and try to pick the surface or the solid and tell me how much fun that is. You can do it by going into pick your surface/solids. Turn off the level with surfaces and then it back on then it will appear with colors, but at the start it will not appear with colors.

[LA CAMmer]

On the Model Geometry page, under Machining Geometry, uncheck Display Remainder.

[Jaz]

36 minutes ago, LA CAMmer said:

On the Model Geometry page, under Machining Geometry, uncheck Display Remainder.

This is what I needed!

Thanks

[LA CAMmer]

You're welcome!

It bugged me for a long time too, before I found that setting.

[crazy^millman]

Learned something. Thank you LA CAMmer.

[LA CAMmer]

No problem.  Glad I could help.