Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Flowline Error


poolrod2
 Share

Recommended Posts

Hi, feed is 200 ipm, spindle is 16000

1 hour ago, huskermcdoogle said:

What were you using for feeds speeds and stepover?

.5 - .75mm stepover, 20krpm, 10000mm/min, should yield decent results if the part isn't flapping in the breeze.  Should be easily sandable with 150 or 220 paper.

rpm, step down is .03 step over is .1 As shown in the pics, I cut the radius side first to keep it rigid.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...