post I can not speak English very well. Edit Post Please.

[sinqhdwo1]

 

O0000
(PROGRAM NAME - 1)
(TOOL - 1   - OD ROUGH RIGHT - 80 DEG. - OFFSET - 1   - INSERT - CNMG 12 04 08 - HOLDER - MWLNR 2525M 08)
G21
G54
 
N1(OD ROUGH RIGHT - 80 DEG. INSERT - CNMG 12 04 08)
G28U0.W0.
T0101
G50 S10000
G96 S275 M03
G0 X63.55 Z0.
G99 G1 X-1.6 F.25
G0 Z2.
G28 U0. W0.
T0001     (T0001 I want to change this part to t0100  )
M05
M30

mplmaster.pst

[jlw™]

It's probably the way to tool is defined, can you share a file?

[Colin Gilchrist]

This is supported "in the post" already. You do not need to edit the Post, you just need to setup your Part File correctly. Please attach a file, so someone can help you...