BIG_INCH.tooldb for 2019

[crazy^millman]

I have been updating the Big_inch tool library since it was deemed unneeded about X9 I think. For those using 2019 and want to have a copy of it here you go. This link should stay active for a long time.

BIG_INCH.tooldb

What I do is copy the tools out of this into my holders and then use the holders as my tool library.

HTH(Hope that Helps)

[mayday]

Hey Ron. got one for 2018?

I'm trying to find a db with pipe taps and or thread mills

[Guest]

Here you go Wes

BIG_Inch.2018.tooldb

 

I don't recall a base library ever having threadmills....those were customs for many years

Edited March 16, 2018 by Guest

[mayday]

Thanks John

[crazy^millman]

21 minutes ago, mayday said:

Hey Ron. got one for 2018?

I'm trying to find a db with pipe taps and or thread mills

Just a matter of updating this one, but John got you the updated one. Yes I agree with John, but Tim Markoski had some things he shared many years ago on ports I still use.

[Metallic]

On 3/16/2018 at 8:57 AM, C^Millman said:

Just a matter of updating this one, but John got you the updated one. Yes I agree with John, but Tim Markoski had some things he shared many years ago on ports I still use.

Is there any reason I would choose to use BIG_INCH vs. the mill_inch library for building out custom tool libraries? Im guessing just more tool choices so i dont have to create customs as much?

 

Thanks

[crazy^millman]

11 minutes ago, Metallic said:

Is there any reason I would choose to use BIG_INCH vs. the mill_inch library for building out custom tool libraries? Im guessing just more tool choices so i dont have to create customs as much?

 

Thanks

You answered your own question. Have to watch the reamers they are a mess.