Changing of Machine in 2019 takes over a minute.

[pullo]

So far no luck with this subject on the other site , so I'll try my luck here .Ever since TP1 up to PB3  changing the machine in the OPS manager takes  about half  a min to open  the window

with my Machine list and then half a min to " settle in " .  I have so far tried different versions of Windows , a 1703 version and the post apocalyptic 1709   .  As it seems to be "doing sometihng " as the mouse icon turns into an open mouth ( O ) I also tried with the network  card turned off , but  no help here .

gcode had a lead that this had plagued him in several older Mcam versions and some IT guy made it go away by tweaking something with the  network.

Any solutions , pointers are welcome. 

 

Gracjan

 

 

[crazy^millman]

It is Mastercam working on the Mircocrap OS things are only going ot get worse the more MicroNSA does more to steal and take information from it's customers.

[gcode]

I had this issue on my Win7 machine at work for over 2 years.. and then I didn't.

I never found a solution, but at some point it started working properly

I think that I had a path to a missing file in my System Config file, or a machine or control definition

It would be interesting to create a fresh user name and try stock machines from a Mastercam install

and see if the delay was still present

 

[Jayson Kramer]

I saw this mentioned on the Mastercam Forum. I have not seen except when we had the winows 10 1709 issues were everything was slow. I have no issue sense updating.
Sorry you are still having this issue wish I could be more help.

 

[pullo]

new disk , new install, nothing but windows and 2019 . At last all is fine

Gracjan