Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

X+ for Mastercam


Recommended Posts

On 3/24/2020 at 7:02 AM, Peter from S.C.C.C. said:

Do you maybe have a video of what your product does?]

 

I currently make my own setup sheet using the .nc code to

display a list of tools and the program name and material in excel format,

 

Second question, Does x+ also work with the gcode, or with Mastercam data?

No NC Code or a Post just NCI data. Where defining holders and everything become very important, but in all honesty anyone programming today should already be doing this anyway IMHO. 

Link to comment
Share on other sites
2 hours ago, 5th Axis CGI said:

No NC Code or a Post just NCI data. Where defining holders and everything become very important, but in all honesty anyone programming today should already be doing this anyway IMHO. 

Oh ok cool, thanks for the info.

Link to comment
Share on other sites
  • 1 month later...
  • 9 months later...
  • 2 months later...

Was this the last free version of X+? I have 2019 and my X+ works fine. I was getting my mcam 2021 setup and after i installed X+ and setup the ribbon it tries to look for a license?

I noticed on the .gmccs website it shows price list now and looks like it uses the Mastercam HASP? Is this now an official plugin you have to pay for?  

sorry for this post just read previous page...

Edited by [email protected]
Read the previous pages and see this topic had already been covered
Link to comment
Share on other sites
1 hour ago, htm01 said:

has anyone heard from Günther ?

i tried emailing for an invoice because i didn't get one this year but never heard back, my license expired on 8/31/21

His website look current, but I sent him and email to check on him. His number is there if you want to reach out to him via phone.

+049 02942 799713

Link to comment
Share on other sites
28 minutes ago, crazy^millman said:

His website look current, but I sent him and email to check on him. His number is there if you want to reach out to him via phone.

+049 02942 799713

he's probably 6 hrs ahead of us if i don't hear back by tomorrow, he hasn't been on here since June

  • Huh? 1
Link to comment
Share on other sites
  • 6 months later...

 

 Hi guys,

 

X+  for Mastercam Public Beta 2023 is now available.

https://www.gmccs.de/downloads_x+.php

 

 

A new setup sheet template “grouping_example” has been added to X+ 2023.

Among other things, it demonstrates how you could group your report by the Groupname (or any other) parameter.

image.png.dc2fb40ad947695a4fbcf74895ff1dbf.png

However, this template also works with previous X+ versions!

Watch this video to see what it looks like.

 

 

As always, I welcome comments and suggestions.

 

 

 

  • Like 2
Link to comment
Share on other sites
1 hour ago, jerichopc said:

2023 stock setup2023.jpg.60ff38c9e1a4149bf492c80837f37f7e.jpg error on verify, it shows rectangle stock as round This is what it looks like when it does run

1994093216_StockSetup2023Cylinder.JPG.47014a0834439d7df447dc7eba6c7393.JPG

I am not sure what your problem is.  But your stock size is square in the 1st picture. and it should show that in the 2nd picture. I would reset up your stock size.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

×   Your link has been automatically embedded.   Display as a link instead

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×