Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Engraving Macro


Recommended Posts

Hello everyone,
   One of my co-workers had showed me engraving without using any CAD/CAM software which is can be used right on HAAS and FANUC controls.  I hope this tip will help you guys. 

   I haven't decided to put this feature under what category for MasterCam post yet but sure I will.  Any suggestions? 

PS: This program will engrave whatever you like of which containing in the open and lose apprentices.  

 

%
O258 (Fast way to Engrave)

T20 M06
G00 G90 G54 X0 Y0 S5555 M03
G43 H20 Z2. M08

G47 P0 J.2 R.1 Z-.01 E50 F7. (PCROBOTIC)
G00 Z2. M09
M05
G91 G28 Z0

G28 Y0

M30

Link to comment
Share on other sites
8 hours ago, PcRobotic said:

Hello everyone,
   One of my co-workers had showed me engraving without using any CAD/CAM software which is can be used right on HAAS and FANUC controls.  I hope this tip will help you guys. 

   I haven't decided to put this feature under what category for MasterCam post yet but sure I will.  Any suggestions? 

PS: This program will engrave whatever you like of which containing in the open and lose apprentices.  

 

%
O258 (Fast way to Engrave)

T20 M06
G00 G90 G54 X0 Y0 S5555 M03
G43 H20 Z2. M08

G47 P0 J.2 R.1 Z-.01 E50 F7. (PCROBOTIC)
G00 Z2. M09
M05
G91 G28 Z0

G28 Y0

M30

I don't believe this will not work on a Fanuc control. Only Haas. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...