hass 5 axis post modify help

[ken wong]

i use mastercam 2018  with hass generic post come with mc, and my hass 5 axis is c and b, so my broblem is when i drill in right side the code should be c0. b90 will be work for my mc , but my post give out c0. b-90 is wrong for machine meanwhile x,y,z  are ok. i try below set ting but no luck

#Primary axis angle description (in machine base terms)
#With nutating (mtype 3-5) the nutating axis must be the XY plane
rotaxis1$ = vecx  #Zero       
rotdir1$  = vecy #Direction  

#Secondary axis angle description (in machine base terms)
#With nutating (mtype 3-5) the nutating axis and this plane normal
#are aligned to calculate the secondary angle 
rotaxis2$ = vecz  #Zero        
rotdir2$  =-vecx  #Direction

please help me 

[ken wong]

i found the problem

i change rotdir2$  =-vecx  #Direction  to rotdir2$  =vecx  #Direction

and open limit to +120

[hoa01841]

Hi Ken,

Which line where I can change the limit to +120? 

Thank you