Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

MC2019 is released


gcode
 Share

Recommended Posts

1 hour ago, C^Millman said:

We still got this in 2019.

image.thumb.png.a73c1dfa85b94b9840046681e6c09c5f.png

I just tried this in MC2019 RTM

I set the Z Depth to 40.

then selected an entity and hit project. the entity copied to Z40 and the Depth field in Project says 40

  • Like 1
Link to comment
Share on other sites
35 minutes ago, Reko said:

Anyone having trouble with the fields not being able to calculate math?

I was in the helix field of a toolpath and typed in .375*.45 and it won't calculate.

It works in all the places I've tried it

That doesn't mean it may not work in some

Link to comment
Share on other sites
19 minutes ago, Mick said:

We get 2019 as we just fit under the cutoff...

Unfortunately, this means you won't get any of the 2019 updates

Sometimes, if they find a serious issue, an update will be released retroactive back to the initial release, but not often.

Link to comment
Share on other sites
46 minutes ago, gcode said:

Unfortunately, this means you won't get any of the 2019 updates

Sometimes, if they find a serious issue, an update will be released retroactive back to the initial release, but not often.

Yes, unfortunately, that is the case. But, we can't justify paying what we pay, for the little that we get (in terms of things other than updates, if you know what I mean)

In all honesty, we wont be using 2019 anyway. Heck, I'm barely using 2018 :)

Link to comment
Share on other sites
13 hours ago, Mick said:

Hah, well I'm loving my new digs :)

I didn't get enough seat time to form an opinion one way or another.

There seem to be extreme opinions on both sides of the equation.

Some love it, some hate it, there is not much of a middle ground

Link to comment
Share on other sites
7 hours ago, gcode said:

I didn't get enough seat time to form an opinion one way or another.

There seem to be extreme opinions on both sides of the equation.

Some love it, some hate it, there is not much of a middle ground

It all depends on how you're introduced to it. And it needs to be treated with a clean approach :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...