5X flow Unwind behavior

[So not a Guru]

Is it possible the force the entry & exit linking parameters to be incorporated in the toolpath at unwinds?

[Colin Gilchrist]

1 hour ago, So not a Guru said:

Is it possible the force the entry & exit linking parameters to be incorporated in the toolpath at unwinds?

No. The wind/unwind behavior is controlled solely by the Post. The NCI path itself contains no retracts, unless you see the retract in Backplot.

For Wind/Unwind behavior, there are 4 different internal routines inside the PSB file, that handle the breakup of motion routines. But all the motion is based on Last / Current / Next move data.

[So not a Guru]

21 minutes ago, Colin Gilchrist said:

The wind/unwind behavior is controlled solely by the Post

Modifying the post to incorporate the entry/exit moves, is what I meant.

It's a Postability post, so we have support. I just wondered if it's possible. If not, there's no need for me to submit it.

[Colin Gilchrist]

26 minutes ago, So not a Guru said:

Modifying the post to incorporate the entry/exit moves, is what I meant.

It's a Postability post, so we have support. I just wondered if it's possible. If not, there's no need for me to submit it.

You could certainly pose the question to Dave. He might just say "no problem", but his skills are also far above mine...

[crazy^millman]

On 7/9/2018 at 5:43 AM, Colin Gilchrist said:

You could certainly pose the question to Dave. He might just say "no problem", but his skills are also far above mine...

Mine as well.