Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

AutoRegen - CHook


Recommended Posts

  • 2 weeks later...
  • 3 months later...
  • 3 months later...

I love it!! Thanks Gunther! & Thanks James for commenting I wouldn't have seen this!!

16 minutes ago, cncappsjames said:

I have it set to startup in my system configuration so I never need to even think about it.

I did that too!!! Great Idea!!

Link to comment
Share on other sites

When I first looked at this yesterday, I didn't think much of it.  But as I worked today, I could see how this can help a lot.  So I loaded all three versions (19/20/21), and have them all set to Start-up.  Thank you very much!

 

Brent

Link to comment
Share on other sites
4 minutes ago, BSmith23 said:

When I first looked at this yesterday, I didn't think much of it.  But as I worked today, I could see how this can help a lot.  So I loaded all three versions (19/20/21), and have them all set to Start-up.  Thank you very much!

 

Brent

Agreed, it saves a small amount of time each regen, but it really adds up!

Link to comment
Share on other sites
1 minute ago, Programinator said:

This is a very nice tool that i have been using for a while now.  

The only thing i wish that it could do is to have it auto regen when changing geometry for toolpath.

Other than that i love it.

+1

Link to comment
Share on other sites
On 6/3/2019 at 5:55 AM, Günther Massimo - GMCCS said:

Gunther... any timeline on when you might update this Chook for Mcam 2021 or does the Beta version work for the full release?

Thanks

 

EDIT: Okay... never mind... I installed and tried the PB1 and it works great.

Thanks again Gunther!!!

Great add on!

Link to comment
Share on other sites
  • 1 month later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 months later...
  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...