Dialog doesn't fit on the screen

[So not a Guru]

So, I just opened a file on my laptop using 2018 & I want to use the quick mask. The dialog opens fine and I select the color I want, but the dialog "ok" check button is below the bottom of my screen.

Anyone know how I can reduce the size of the dialog? I'm set at the maximum resolution of 1920 x 1080 on my laptop.

[Leon82]

Can you control minus To zoom out and adjust the window. The go to 100% and refit the window?

[So not a Guru]

14 minutes ago, Leon82 said:

Can you control minus To zoom out and adjust the window. The go to 100% and refit the window?

No, that doesn't work.

[Leon82]

Will it let you shring the window from the top, then drag it back up?

[Leon82]

Try un maximizing the mastercam window itself maybe

[So not a Guru]

Just now, Leon82 said:

Will it let you shring the window from the top, then drag it back up?

No, that was the 1st thing I tried. I guess this is the 1st time I've tried to use 2018 Quickmask on my laptop. It really sucks, because this is one of my favorite MC functions.

[Leon82]

Here's a long shot but see if you can switch your monitor to vertical. then maybe you can shrink the window and change the orientation back

[So not a Guru]

2 minutes ago, Leon82 said:

Here's a long shot but see if you can switch your monitor to vertical. then maybe you can shrink the window and change the orientation back

Well, that made it so I could see the whole dialog, but there is no way to shrink it! Grabbing the top, bottom or sides will only move it, not resize.

[Leon82]

11 minutes ago, So not a Guru said:

Well, that made it so I could see the whole dialog, but there is no way to shrink it! Grabbing the top, bottom or sides will only move it, not resize.

Huh, that is a weird one. Have you tried a lower resolution ?

[So not a Guru]

2 minutes ago, Leon82 said:

Have you tried a lower resolution ?

Yeah, that made it worse. I guess I'll call my reseller after we get back from our vacation.

 

[ahaslam]

Try reset your dialog position using advanced configuration.

If that doesn't work we can reset the mcamx.config dialog positions. I just gotta remember how. 

[So not a Guru]

1 hour ago, ahaslam said:

Try reset your dialog position using advanced configuration.

I'll try that tonight.

[?Mark]

Is that a 4k screen?

If so you might want to play with some other adjustments too. It's been covered before...