Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

5 axis retracts


TheePres
 Share

Recommended Posts

- You may use a safety zone

- You can split your swarf toolpath in several toolpaths (with one pass only) then use a curve 5x toolpath in between to make your tool go exactly where you want the way you want 

- Same as above but you can make it pretty automatic using specific 5x transition toolpath 

Which Mastercam release? May you post a file?

Link to comment
Share on other sites

You have to expand linking parameters. And activate the check box.

 

There are parameters to set I use cylinder. You can use an axis line too or enter the points. 

To link a bunch of paths you can use mulitaxis linking, which will make a zone for all the paths you select.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...