Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

MasterCam won't load .ipt files


GeorgeHaas
 Share

Recommended Posts

The computer that housed our old Mastercam X4 program and Inventor crashed and we had to reinstall it.  After the reinstall of both programs on a new computer, we can no longer import the files from Inventor.  It is telling us that we need to install Inventor or Inventor Viewer.  We have tried to do both to no avail.  I also updated the Hasp drivers from Mastercams website and that didn't help either.  Any help would be appreciated.

 

Link to comment
Share on other sites
30 minutes ago, GeorgeHaas said:

The computer that housed our old Mastercam X4 program and Inventor crashed and we had to reinstall it.  After the reinstall of both programs on a new computer, we can no longer import the files from Inventor.  It is telling us that we need to install Inventor or Inventor Viewer.  We have tried to do both to no avail.  I also updated the Hasp drivers from Mastercams website and that didn't help either.  Any help would be appreciated.

 

Your software is 8 versions old. I'm not sure you're going to have much luck with getting help, being that far out of date. Sorry I don't have any helpful advice besides a polite suggestion that you should bit the bullet and upgrade to the current version of Mastercam. With software that old, you are going to have problems finding computer hardware that can even run it, and the issue of obsolescence will only get worse with each passing year.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...