check toolpath

[mirek1017]

Good morning All, I saw the  similar topic   before ,but I cant find it now .I download  sample  file  from mastercam.com  for play and learn same base 5 axis toolpath .When press toolpath geometry  check what solid or surface is select  mastercam 2018 or 2019 don not show me  ,I now there is same option for see what is select ,surface or line  but i cant find it  .In X9 the was function " show solid ore surface " I can find this on 2019 

 

thanks 

 

 

[Roger]

Is this it?

[mirek1017]

Thanks Roger 

what about when for example I want  to check geometry for parallel  or morph 5 axis ??I want to check what surface some one mark . On x9 the was function "see solid ore surface " I can not find this on 2018 

[Roger]

Sorry, I can't offer any help on that one, maybe someone else will chime in on this post.

[mirek1017]

This is example ,when I press surface on 2019 I not  see windows with surface selection for verify what  I am select 

[Roger]

I still don't follow what your asking.  Your screen clip above shows 90 surfaces selected.

[PAnderson]

I think he means he wants to see them highlighted. Previous versions used to highlight them.

 

Paul

[mirek1017]

OK ,can you open toolpath  parameters  on this file  and show me what surface is select for parallel tool control  ???

SAMPLE.mcam