Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

error trying to adjust start of a loop


Roger
 Share

Recommended Posts

Roger,

 

I tried this out in solid selection and got the same thing. However, it did let me select different points. I'm not sure what the error is, but it should not be preventing you from selecting the start point you want. I just right clicked on the Loop selected "Start Point" it launched the error, which I ignored, and reselected a different start point. It accepted and the input and I closed it with enter.

 

The error is pretty weird though. Maybe it has to do with the chain being 3D? (At least mine was on a 3D surface.)

 

With Regards,

 

Caleb

Link to comment
Share on other sites
33 minutes ago, Manofwar said:

Roger,

 

I tried this out in solid selection and got the same thing. However, it did let me select different points. I'm not sure what the error is, but it should not be preventing you from selecting the start point you want. I just right clicked on the Loop selected "Start Point" it launched the error, which I ignored, and reselected a different start point. It accepted and the input and I closed it with enter.

 

The error is pretty weird though. Maybe it has to do with the chain being 3D? (At least mine was on a 3D surface.)

 

With Regards,

 

Caleb

Thanks for taking a look, on my part it's a 2D surface, and wouldn't let me select other points. 

Link to comment
Share on other sites
On ‎10‎/‎20‎/‎2018 at 5:20 AM, Old_Bear said:

Even though solid chaining has gotten much better, and it has, I still mostly use wireframe for the most part becasue of the control ability I have over the toolpath.

 

I've always done wireframe for my tool paths, I thought I'd try something different.  I guess I'll just continue with creating wireframe..........🙄

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...