Update old Post very 9.1 to 218

[hoa75nguyen]

Hi everyone,

I have an old Post from Version 9.1 and I wanted update it to 2018 version. it there a way to do it?

Thanks so much for the help!

[htm01]

you'll need to use a few different versions, x5 or x6 is the last that will do v9.1, then you will need x8 or x9, 2018 will convert from there

[Zaffin_D]

1 hour ago, htm01 said:

you'll need to use a few different versions, x5 or x6 is the last that will do v9.1, then you will need x8 or x9, 2018 will convert from there

You do not need to go back that far, X9's Update Post C-Hook can update posts from V4.

[htm01]

4 minutes ago, jeff.D said:

You do not need to go back that far, X9's Update Post C-Hook can update posts from V4.

good to know, never used that c-hook, always used migration update

[#Rekd™]

Contact your reseller and they will help you.

[jeff]

8 hours ago, hoa75nguyen said:

Hi everyone,

I have an old Post from Version 9.1 and I wanted update it to 2018 version. it there a way to do it?

Thanks so much for the help!

If it's just a simple 3 axis mill post or simple 2 axis lathe post, you might be better off just getting a new 2018 post.