Horizontal Index B axis on separate line

[TerraXJ]

Hey guys, looking for some help.

We have a Mori Seiki that needs to see the B axis move on a separate line to any X or Y lines.

This is what we are currently seeing,

"G00 G17 G20 G40 G80 G90
G91 G28 Z0.
T5 (1/2 DRILLMILL)
M06
G30 X0. Y0. Z0. T8
(MAX - Z.25)
(MIN - Z-.035)
G00 G17 G90 G54 B0. X2. Y-13.725 S2800 M03  <-------
G43 H5 Z.25 M08...."

 

And would like to see

"G00 G17 G20 G40 G80 G90
G91 G28 Z0.
T5 (1/2 DRILLMILL)
M06
G30 X0. Y0. Z0. T8
(MAX - Z.25)
(MIN - Z-.035)
G00 G17 G90 G54 B0.  <--------

X2. Y-13.725 S2800 M03  <-------
G43 H5 Z.25 M08...."

 

Any help would be appreciated! 

[Leon82]

Look in the ptoolchange blocks and prapidout blocks. 

You will see the lines where xy and z are output with your b code 

[Leon82]

Make a backup of the post if you are going to experiment with it.

 

[nickbe10]

12 hours ago, TerraXJ said:

Any help would be appreciated! 

Its tough to say with the information given but it should be a pretty easy fix.

What is your "base" post? Most people start with MPMASTER (available here on this site) or one of the CNC generics like MPFAN.

Look in the .pst file header and it should tell you where the post originated. Once we know this we can get you much closer.

[huskermcdoogle]

If your base post is an MPMaster you can just turn on safeindex in your misc ints.  That should automagically do what you are wanting.

[TerraXJ]

Thank you! Found it last night and got it working.

 

Yes it was MPMASTER

[Leon82]

You may want to edit your defaults file so that way it's always checked if you want that output all the time