Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Generic Haas VF-TR_Series 5X Mill - last_op_id???


Recommended Posts

Thanks, I'll look into that.  I went ahead and added last_op_id so I could use it.

I don't know if opinfo will work here as it will actually look at the last op and I only need to evaluate inside of ptlch$ and ptlscg0$ for my sequence number output (same way I always do it - just the Haas post didn't have last_op_id.

Side note, is there a way to get operation manager number that is the same as opinfo(15240,0) without opinfo?  Just curious.

Link to comment
Share on other sites

I was thinking that on the first pass thru it would read different and then set the last_op_id in ptlchg$ and would output but not after because last op would then be the same as op_id.  But if I use opinfo() it will always be the same as the previous op and will always output.  I didn't test it.  Just a theory.  I will test that theory and get back to you on it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...