SFM, ADOC, RDOC, IPT for Dynamic tool pathes

[ujmujm]

Does any body have a good resource for cutting data for Mastercam's Dynamic tool pathes, I'm doing a Dynamic mill tool path in 6061-T6 with 3/4" three flute end mill every  cutting tool manufactures website I go to have the standard cutting parameters.

[crazy^millman]

hsmadvisor and have a nice day.

Link

Here is what I came up with for something for a 100hp machine. 

Material: 6061-T6 Series Aluminum 95 HB
Tool: 0.750 in 3FL Carbide TiAlN Solid End Mill
Speed: 5000.0 f/min / 25477.7RPM
Feed: 0.0211 in 0.0634in/rev 1614.30 in/min
Chip Thickness: 0.0169 in
Reference Chip load: 0.1633 mm
Engagement: DOC=0.75 in WOC=0.15 in
Effective Dia: 0.750 in
Cross Section: 0.20 x Dia.
Power: 53.4HP
MRR: 181.61 in³
Torque: 11.01 ft-lb
Max Torque: 27.60 ft-lb
Cutting Force: 352.2 lb
Deflection: 0.0002 in
Max Deflection: 0.00167 in

 

[ujmujm]

Thank you sir I will give this a try.

[ujmujm]

Yikes! I guess I'm a little off but I'm still playing,

SFM= 1962

RPM=10000

IPM=204.27

IPT=.0068

Which didn't look to far off.

[crazy^millman]

22 minutes ago, ujmujm said:

Yikes! I guess I'm a little off but I'm still playing,

SFM= 1962

RPM=10000

IPM=204.27

IPT=.0068

Which didn't look to far off.

That is a good starting place.

[civiceg]

Quote

TiAlN

In aluminum?