RH cut LH helix endmills

[Ewood42]

Anyone know of another manufacturer besides maritool that makes downcut endmills for stainless/high temp alloys? IMCO rep offered to have a test tool made up for us, and the quantity we go through will make it a standard tool if we go with it, but I was hoping to try an off the shelf option sooner rather than later. Ordering from Maritool tomorrow if I don't hear anything.

Volume on these parts is doubling over the next 4 months and we're sitting at 70% capacity on the machine they run on.

[Tim Johnson]

OSG has them (limited sizes) but I can't answer how they are for stainless or high temp alloys.