Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Live tooling tapping (radial) error NO SPINDLE RPM


mastercam_newbie101
 Share

Recommended Posts

Hi guys

      My name is Glen, I am new at emastercam and new to cnc lathe machines. i just have a question regarding tapping with live tooling( radial).

I can back plot it and everything seems fine but when i post it machine error NO SPINDLE SPEED.

 

This is the G codes for the drilling and tapping, i only have problem with tapping.

 

 

image.thumb.png.7988056a8647d49017f8ec08edfdbd60.png

 

thanks in advance

Link to comment
Share on other sites

In the ptlchange blocks there is usually a line that says if drill cycle is not equal to 3 *speed. That is a very crude translation as all posts are different.

 

So this is where you need to look 

 

You could remove that logic and just force the spindle speed output. If the post is shared it will affect other machine

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...