Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Asoblute/ Incremental question


Recommended Posts

Hello everyone,
   I am trying to use the PPAR to separate between the ABSOLUTE and INCREMENTAL for my own alarm message but somehow I got it fail to do the right job.  Below here are my codes, would you guys please point out what I've done wrong?


Trully appreciated,
   SLuong

 

=====================================================================================================

OpTopOfStock : 0 # Operation Top of Stock
AbsoluteOpTopOfStock: 0
IncrementalOpTopOfStock : 0 

OpRtrPlane  : 0  # Operation Retract plane
AbsoluteOpRtrPlane  : 0  # Operation Retract plane
IncrementalOpRtrPlane  : 0  # Operation Retract plane

sTopOfStockConflictsRetract: ""


if AbsoluteOpTopOfStock > AbsoluteOpRtrPlane, [if mprint(sTopOfStockConflictsRetract, 2) = 2, exitpost$] # CHECK ON RETRACT PLANE

#Region sTopOfStockConflictsRetract
sTopOfStockConflictsRetract = "CUT#"+sToolPathNumber+" * TOP OF STOCK is HIGHER than RETRACT PLANE"
                              +no2asc(13)+"TOOL#"+no2str(t$)+" ("+s20001+")"
                              +no2asc(13)
                              +no2asc(13)+"Current RETRACT is Z"+no2str(OpRtrPlane)
                              +no2asc(13)+"Current TOP OF STOCK is Z"+no2str(OpTopOfStock)
                              +no2asc(13)
                              +no2asc(13)
                              +no2asc(13)+" Step 1 = Go to PARAMETERS"
                              +no2asc(13)+" Step 2 = Look for LINKING PARAMETER"
                              +no2asc(13)+" Step 3 = Look for current RETRACT value =====> "+no2str(OpRtrPlane)
                              +no2asc(13)+" Step 4 = Look for current TOP OF STOCK value =====> "+no2str(OpTopOfStock)
                              +no2asc(13)+" Step 5 = Chanage TOP OF STOCK value LOWER than RETRACT VALUE"
                              +no2asc(13)
                              +no2asc(13)+"If you avoid to fix this issue, tool will be PLUNGED DOWN into part."
                              +no2asc(13)+"THIS IS SERIOUS STUFF, IT MUST BE FIXED ASAP!!!"
                              +no2asc(13)
                              +no2asc(13)+"Click OK to go back to MASTERCAM to fix this issue NOW!!!"
#EndRegion sTopOfStockConflictsRetract


ppar
           if prmcode$ = 10027, OpTopOfStock = rpar(sparameter$, 1) # Operation Top of Stock

       if prmcode$ = 10027, 
        [
         AbsoluteOpTopOfStock = rpar(sparameter$, 1) # Operation Top of Stock
         IncrementalOpTopOfStock = rpar(sparameter$, 2) # Operation Top of Stock
        ]

       if prmcode$ = 15374, OpRtrPlane = rpar(sparameter$, 1) # Operation Retract plane
           if prmcode$ = 15374, 
        [
         AbsoluteOpRtrPlane = rpar(sparameter$, 1) # Operation Retract plane
         IncrementalOpRtrPlane = rpar(sparameter$, 2) # Operation Retract plane
        ]

Warn Message.png

Linking Parameter.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...