Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Peel mill arcs


So not a Guru
 Share

Recommended Posts

42 minutes ago, So not a Guru said:

I use HS settings for this path and my control won't allow helical moves, in HS. 2D arcs are no problem, but the peelmill path creates tiny Z move (0.0001" - 0.001") helices for some darned reason.

could that be micro lift distance causing the .0001 - .001" movements you described? i cant think of how you would get helixes since the toolpath stays down in z but maybe micro lift distance is causing this? you could try setting micro lift to 0 to see if they go away.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...