Mastercam 2017 and X8

[Flyinbrian2006]

A few days ago I was running mastercam X8 in the HAAS VF1 machine with no problems at all.  As soon as our IT guy installs mastercam 2017 onto my computer, I can write and run 2 separate toolpaths with no problem,  but the 3rd tool path will alarm when downloading it to the HAAS machine.  Hoping someone will have an answer.

[nickbe10]

11 hours ago, Flyinbrian2006 said:

Hoping someone will have an answer.

Did you update your post? If the machine is alarming on download there must be something in the G code it doesn't like.

[PcRobotic]

On ‎1‎/‎10‎/‎2019 at 5:55 PM, Flyinbrian2006 said:

A few days ago I was running mastercam X8 in the HAAS VF1 machine with no problems at all.  As soon as our IT guy installs mastercam 2017 onto my computer, I can write and run 2 separate toolpaths with no problem,  but the 3rd tool path will alarm when downloading it to the HAAS machine.  Hoping someone will have an answer.

I had this problem before and here is how I fixed it.

The problem is some of the IF, ELSE condition is conflicting to the new one 2017.  Another issue is some of the STRING in the post, 2017 wants to define a bit different.  

 

Solution:
   Look inside your post and search for ">>>>>>>>>" and the next texts probably ERROR MESSAGE.  Copy and paste it on this forum and I will you more, I need to read what exact the error message to solve your issue.