Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Adding a Peck Field to the Toolpath Tap Menu


Born to machine
 Share

Recommended Posts

tap.thumb.jpg.a01cc412f4bfd4f32da91802f8b284bd.jpgHi All,

im running X9 and im trying to add a peck field (not peck field like circled above)to either the rigiid tapping or normal tapping page withing mastercam..

Ive can get into cthe control def file and see the area i need to change..

But it doesnt seem to take effect once i change it..

Im no expert but im thinking there is alot more to it than just adding some txt..

Would my mastercam dealer be the right person for this?

Thanks  jas..

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...