2019 Generic Haas ST 4X MT_Lathe post issue

[MSL]

Hi,

 I downloaded the 2019 Generic Haas ST 4X MT_Lathe post from MaterCam website ( Tech exchange).

I'm cutting a face contour. when I activate the  Misc. Integer 4, my X values comes out way too small even negative X values.

How can I fix this?

I attached a sample file.

 

Thank you,

ST20 Test.mcam

[jlw™]

Me thinks you're missing something here... that's polar coordinate output.  The code is right.

[MSL]

Hi JIw,

Thank you for the reply. It is polar coordinate output. I will run the codes on the machine and post the results.

Thank you.

[Rocketmachinist]

Does it have milling mode g112? I would use that setting instead. Plus I thought you guys were better than using Haas machines. When I spoke to all your guys at IMTS they were touting all the awesome machines you have, not dinky Haas.. And they are fun to drink with.

[MSL]

Misc. Integer 4 outputs G112/G107. we have couple of ST20Y and ST10Y at the college I teach part time.