strange toolpath request

[crazy^millman]

36 minutes ago, master80 said:

I asked what 5 axis toolpath  I can use for get same thing like this .I am not 5 axis expert .When I try morph 5axis  I can finish only one side (wall )  the make other one for other side .This sample show ,haw you can finish this part run  both sides .

 

thank you Rich

No sir you didn't ask that specifically and Rich answered the original question you asked. One thing does not equal the other and show us the same example on a variable pitch then we can try to match apple to apples. You gave a specific question and he gave you the specific answer to match it. When you can produce a model and have something comparable to compare it to and then are willing to pay for it I would be glad to spend the time to show you, but sorry your are not comparing apples to apples here. 

Rich Excellent work sir!!!!!

I agree this should be a completely different topic.

[Richard Thomas - Mastercam UK]

Thanks Ron, most kind sir  

Master80, please start a new thread if you want to continue discussing your needs.

[mirek1017]

Ok ,my question was ,Can I run this back  and forth like on this video use 5 axis toolpath  on mastercam???I do not ask for you time and program .simple  question   yes ore no 

[crazy^millman]

42 minutes ago, master80 said:

Ok ,my question was ,Can I run this back  and forth like on this video use 5 axis toolpath  on mastercam???I do not ask for you time and program .simple  question   yes ore no 

Yes.

[mirek1017]

2 minutes ago, 5th Axis CGI said:

Yes.

thanks for your time 

[Colin Gilchrist]

44 minutes ago, master80 said:

Ok ,my question was ,Can I run this back  and forth like on this video use 5 axis toolpath  on mastercam???I do not ask for you time and program .simple  question   yes ore no 

Yes. You can use the Advanced 4X Roughing path in 2018 onwards I believe.

There is a specific path for this.

[Slepydremr]

Closest I could get.

[jlw™]

So I'm sitting over here thinking that the plain old 2d facing path will do exactly this.

[JParis]

It is doable from a single line, it is however counterintuitive....

Draw your line 90 degrees to the desired cutting direction and uses stepover, kep tool down and zig zag cutting direction

 

 

step over.mcam