Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Thread Mill 1st pass


Recommended Posts

Hi Gav123

First time I have posted on this forum so hope this works.

 

In the Multi Passes section, have you got the number of roughing passes at more than 1?

I generally cut threads with 2 roughing passes and 1 finish pass. The 2 roughing passes at 30% of the diametric cut depth and the finish pass at 10% of the diametric cut depth. This seems to work pretty well.

The image for the step over in this section shows radial, which as far as I am aware is incorrect.

Hope this helps

Dale

 

 

Untitled.png

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...