Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mazak HCN6800 B Axis


SRD93PGT
 Share

Recommended Posts

G17?? I dunno...

 

This is code that's running right now 

 

G0G17G40G80G90G94G98    <--------Right in the safety line
G0G28G91Z0.
G61.1
(5/8 3FL DESTINY VIPER  1.250 LOC #V34020S TOOL - 2 DIA. OFF. - 51999 LEN. - 51999 DIA. - .625)
(.625 FEM / ROUGH TOP FLAT / -.250)
T12010625M6
G90G10L10P#51999R0
G90G10L12P#51999R0
G0G90B270.
G0G54.1P2G90X-1.9175Y-1.913S18000M3
G43H#51999Z1.M8M130
T12010375
Z.1
G1Z-.23F250.
G41D#51999X-1.605Z-.25
X.105
G40X.4175Z-.23
G0Z1.
X-1.9175Y-2.213
Z.1
G1Z-.23
G41D#51999X-1.605Z-.25
X.105
G40X.4175Z-.23
G0Z1.
(.625 FEM / ROUGH TOP FLAT / -.250)
X-1.5825Y-10.415
Z.1
G1Z-.23F35.
G41D#51999Y-10.1025Z-.25F250.
Y-2.433
X.0825
Y-10.1025
G40Y-10.415Z-.23
G0Z1.
(.625 FEM / FINISH TOP FLAT PROFILE / -.257)
X-1.9175Y-1.913
Z.1
G1Z-.237F35.
G41D#51999X-1.605Z-.257F140.4
X.105
G40X.4175Z-.237
G0Z1.
X-1.9175Y-2.213
Z.1
G1Z-.237F35.
G41D#51999X-1.605Z-.257F140.4
X.105
G40X.4175Z-.237
G0Z1.
(.625 FEM / FINISH TOP FLAT PROFILE / -.257)
X-1.5625Y-10.415
Z.1
G1Z-.237F35.
G41D#51999Y-10.1025Z-.257F140.4
Y-2.453
X.0625
Y-10.1025
G40Y-10.415Z-.237
G0Z1.
(5/8 ENDMILL / ROUGH MILL MOUNTING FLAT AND RAD / -1.500)
G0G90Z10.
G0G90B180.
G54.1P5X-.6321Y-.8834
Z1.
Z.125
G1Z-1.5F500.
X-.5982Y-.804
G3X-.5869Y-.7488I-.1293J.0552
G1Y-.7114
Y-.7091
G3X-.6149Y-.698I-.0426J-.0662
X-.7403Y-.6768I-.1819J-.6945
X-1.0191Y-.6642I-.3046J-3.6479
X-1.2407Y-.6621I-.2794J-18.3149
G1X-1.2656Y-.662
X-1.5125Y-.6608
G2X-1.7305Y-.5763I.0085J.3453
X-1.8456Y-.4291I.3101J.361
X-1.9098Y-.2474I.668J.3384
X-1.9411Y-.0145I1.5444J.3263
X-1.952Y.3495I6.4572J.3752
G1X-1.9522Y.3748
X-1.9535Y1.3004
Y3.7972
Y6.2939
Y6.62

Link to comment
Share on other sites
7 minutes ago, Old_Bear said:

G17?? I dunno...

 

This is code that's running right now 

 

G0G17G40G80G90G94G98    <--------Right in the safety line
G0G28G91Z0.
G61.1
(5/8 3FL DESTINY VIPER  1.250 LOC #V34020S TOOL - 2 DIA. OFF. - 51999 LEN. - 51999 DIA. - .625)
(.625 FEM / ROUGH TOP FLAT / -.250)
T12010625M6
G90G10L10P#51999R0
G90G10L12P#51999R0
G0G90B270.
G0G54.1P2G90X-1.9175Y-1.913S18000M3
G43H#51999Z1.M8M130
T12010375
Z.1
G1Z-.23F250.
G41D#51999X-1.605Z-.25
X.105
G40X.4175Z-.23
G0Z1.
X-1.9175Y-2.213
Z.1
G1Z-.23
G41D#51999X-1.605Z-.25
X.105
G40X.4175Z-.23
G0Z1.
(.625 FEM / ROUGH TOP FLAT / -.250)
X-1.5825Y-10.415
Z.1
G1Z-.23F35.
G41D#51999Y-10.1025Z-.25F250.
Y-2.433
X.0825
Y-10.1025
G40Y-10.415Z-.23
G0Z1.
(.625 FEM / FINISH TOP FLAT PROFILE / -.257)
X-1.9175Y-1.913
Z.1
G1Z-.237F35.
G41D#51999X-1.605Z-.257F140.4
X.105
G40X.4175Z-.237
G0Z1.
X-1.9175Y-2.213
Z.1
G1Z-.237F35.
G41D#51999X-1.605Z-.257F140.4
X.105
G40X.4175Z-.237
G0Z1.
(.625 FEM / FINISH TOP FLAT PROFILE / -.257)
X-1.5625Y-10.415
Z.1
G1Z-.237F35.
G41D#51999Y-10.1025Z-.257F140.4
Y-2.453
X.0625
Y-10.1025
G40Y-10.415Z-.237
G0Z1.
(5/8 ENDMILL / ROUGH MILL MOUNTING FLAT AND RAD / -1.500)
G0G90Z10.
G0G90B180.
G54.1P5X-.6321Y-.8834
Z1.
Z.125
G1Z-1.5F500.
X-.5982Y-.804
G3X-.5869Y-.7488I-.1293J.0552
G1Y-.7114
Y-.7091
G3X-.6149Y-.698I-.0426J-.0662
X-.7403Y-.6768I-.1819J-.6945
X-1.0191Y-.6642I-.3046J-3.6479
X-1.2407Y-.6621I-.2794J-18.3149
G1X-1.2656Y-.662
X-1.5125Y-.6608
G2X-1.7305Y-.5763I.0085J.3453
X-1.8456Y-.4291I.3101J.361
X-1.9098Y-.2474I.668J.3384
X-1.9411Y-.0145I1.5444J.3263
X-1.952Y.3495I6.4572J.3752
G1X-1.9522Y.3748
X-1.9535Y1.3004
Y3.7972
Y6.2939
Y6.62

He said in the index line not in the program is the way I understand that. I do see G17 in the example code and I have never posted an index angel with a plane call before.

  • Like 1
Link to comment
Share on other sites
17 minutes ago, 5th Axis CGI said:

He said in the index line not in the program is the way I understand that. I do see G17 in the example code and I have never posted an index angel with a plane call before.

I Missed that...on an index line...nope, never done that

Link to comment
Share on other sites

Well I usually always call workoffset, plane, index before I move.  Never had an issue before this machine.  I’ll have to change my post then for this one.  It’s the little things!  Freaking spent a whole day figuring this one out.  Mazak still doesn’t know why it doesn’t work on this machine and not the others we have.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...