Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Post Modification for Hwacheon Sirius Fanuc 31i 4XRH


Recommended Posts

Hello All,

I need support in the following modification on the machine Hwacheon Sirius Fanuc 31i 4XRH.

In the NC code below you can see in the line: X-50.699 A274.67 F.2

The feed rate is 0.2mm/min, this feed I have not specified anywhere.

The feed specified by me is 1000 mm/min.

 

%
O9999
(PROGRAM NAME - 9701972668R125-RH)
(DATE=DD-MM-YY - 27-03-19 TIME=HH:MM - 10:42)
G21 G0 G17 G40 G49 G80 G90
G91 G28 Z0.
N1
( 12 BULL-NOSED ENDMILL | TOOL - 11 | DIA. OFF. - 11 | LEN. - 11 | TOOL DIA. - 12. )
T11 M6
G0 G90 G54 X-55.9 Y0. A85.328 S2000 M3
G43 H11 Z113.4 M8
Z73.4
G1 Z62.9 F1000.
A274.671 F910.9
X-50.699 A274.67 F.2
X-50.531 A274.665 F30.7
X-50.362 A274.654 F63.3
X-50.194 A274.639 F91.5
X-50.026 A274.618 F126.4
X-49.858 A274.591 F156.8
X-49.692 A274.56 F183.3
X-49.527 A274.523 F215.2
X-49.362 A274.482 F242.
X-49.2 A274.435 F276.5

Can anyone tell me where this feed is coming from or where I can edit it in the post? or what has to be done for this to get the correct feed rate in that location.

Please let me know if you would need the mcam file.

 

Regards,

Chirag
 

 

 

Link to comment
Share on other sites

@Frank Caudillo Thank you. Yes I had posted this thread in 2 different forums and found some answers in the other thread. I'm sorry I had reached my posting comment limt of 3 so couldn't reply. The rotary was set to degree/min hence was getting such type of feed which was not what I desired. Thank you all for your help on the post in this thread and my other thread appreciate it a lot This is a good community.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...