Setting up MasterCam2019 Question

[Student01]

I am setting up mastercam 2019 on a new computer. I transferred all of my data from my old computer with mastercam 2019 on it and noticed that Mill Turn doesn't show up on the new computer under Machine > Machine Types. I had it on my old computer, but I guess I forgot how to get Mill Turn to show up again.  Could someone help me?

 

 

Thanks

[#Rekd™]

Use the migration tool.

 

[Student01]

I did, but Mill Turn still doesn't show up. The only thing that I did different than the video was that in the migration wizard I left everything checked (which shouldn't be a big deal. Might just take a little bit longer). Am I missing a step?

Edit: In conclusion- All of my posts transferred (I can see them in the public documents folder). The problem is when I go to the Machine tab > Machine Type section. Mill Turn doesn't even show up there.

[#Rekd™]

Are you sure you have a mill/turn licence??

[Student01]

It's a network licence. I can see the licence for Mill Turn in nHaspX. Anyways, what you are saying is that if I have the licence Mill Turn should appear under the Machine Type section? It might not be grabbing the correct license from the network.

 

Note: I have reached the maximum number of posts for the day. So I will just update this post.