Help with alarming line on code

[NunoFelix79]

Hi,

Not sure if this is the best place to post this issue.

Every time i use this tool #18,  it post a second G65 line and if i don't deleted it alarms my machine. Not just on one machine, but in multiple machines it does it.

How can i avoid that line from posting?

See code below:

 

G00 G17 G40 G49 G80 G90 M23
(TOOL 18 - 0.1245 FLAT ENDMILL  DIA .1245)
N1 T18
M06
S10000 M03
#2002=.0623
G65 P9603 H1. D2. B0. E1. Z.04 X.0522 S.05 T.05
G65 P9603 H1. D2. B2. E0. Z.04 X.0522 S.05 T.05 C4. Q0.001 A3. R0.0002
M08
M250
G05 P10000
G00 G90 G54 X1.196 Y-.0185 S10000 M03
G43 H1 D2 Z.25

 

[nickbe10]

 

41 minutes ago, NunoFelix79 said:

How can i avoid that line from posting?

We would need to see the .pst file. Also the trace from the debugger would be useful.

Any idea what mechanism is being used for posting the G65 line, is it a Manual Entry for instance?

The fact that it only happens with T18 indicates a "trap" which may or may not throw an error on posting.

[NunoFelix79]

MAKINOV33I.PST

See attached

[nickbe10]

16 hours ago, NunoFelix79 said:

See attached

I'll try and look at it today sometime.