CANTEXT, ater position

[PcRobotic]

Hello everyone, 
   I am trying to use CANNED TEXT OPTIONS in the CANNED TEXT function and the position of the canned text is not where I think it should be.  I am looking for a call out CANTEXT in the post but I don't know why.  Would you guys please point out of what I miss?

 

ps: see image..

 

Thanks...

 

 

================= G-CODES ===============

N31(PICK UP TOP SURFACE, CUT#1)
G0 G17 G40 G49 G80 G90(7.56S)
G91 G28 Z0 M19
/G28 Y0.
T31 M6(.2360,PROBE, U, CERAMIC, .218RLF,)
G90 G54
X0. Y0.
G43 H31 Z3. T1(DOC= Z.375)
Z1.(Z SURFACE FIND)
G4 P5.(5S SAFETY STOP)
G1 Z.5 F5.
G65 P9995 W1.(G54) A20. H-.375
G0 G90 Z1.
(*)
N3102(PICK UP XY0 CENTER, CUT#2)
(.2360,PROBE, U, CERAMIC, .218RLF,)
G0 G17(XY PLANE) G90 G54(1.56S)
X0. Y0.
G43 H31 Z3.(DOC= Z.375)
G17(XY PLANE) G90
M0 Z.5(RECTANGLE BLOCK)   ====================================> M0 should not be here....
G4 P5.(5S SAFETY STOP)
G1 Z.375 F5.
G65 P9995 W1.(G54) A13. D6.375 E4.31 H-.55
G0 G90 Z.5
G91 G28 Z0.
/G28 Y0. M5
M1 =================================> It should be replacing the M1 to  M0

[crazy^millman]

M1 is probably hard coded in your post and not controlled by CANTEXT so not even a good thing you're trying to accomplish IMHO using that as an example. Getting M0 there should be easy if you look to MPMASTER and mi10$.

Will never happen the way you think. You must use the toolpath editor to get down to that level of control. Trust me I have living document that by the time I am done I think it will have 5000 comments to cover all the things every operator at one company wants to see for these types of comments.