Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

HELP !! need od canned cycle to post u minus for stock

Recommended Posts

I have figured out how to fix my problem . it was tricky but it works. and no its not just changing the variable to a minus lmao!!


prcc_setup_dir  #Lathe canned cycle setup direction
      if orient$ = one|orient$ = two|orient$ = five|orient$ = six, lccdirx = m_one # (U minus fix) THIS WAS = ONE ## CHANGED FOR THE U MINUS ON OD CANNED CYCLES AND U PLUS FOR ID 
      else, lccdirx = one															
      if orient$ = one|orient$ = four|orient$ = five|orient$ = 8, lccdirz = one  # THIS ONE WAS = m_ONE
      else, lccdirz = m_one
Edited by d4ofusc
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

×   Your link has been automatically embedded.   Display as a link instead


  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us