HELP !! need od canned cycle to post u minus for stock

[d4ofusc]

Hello , I have a x minus machine and when i post a canned turning cycle the U value is a + number. I need U- on OD and U+ on ID cycles.

[d4ofusc]

I have figured out how to fix my problem . it was tricky but it works. and no its not just changing the variable to a minus lmao!!

 

prcc_setup_dir  #Lathe canned cycle setup direction
      if orient$ = one|orient$ = two|orient$ = five|orient$ = six, lccdirx = m_one # (U minus fix) THIS WAS = ONE ## CHANGED FOR THE U MINUS ON OD CANNED CYCLES AND U PLUS FOR ID 
      else, lccdirx = one															
      if orient$ = one|orient$ = four|orient$ = five|orient$ = 8, lccdirz = one  # THIS ONE WAS = m_ONE
      else, lccdirz = m_one

Edited April 11, 2019 by d4ofusc
ADDED THE CODE SNIPPET TO HELP OTHERS