Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Undercut issues


Rstewart
 Share

Recommended Posts

Hey guys,

Using MC2019.  I've drawn the custom tool geometry for this 3/8 lollipop mill on a level in the correct orientation.  Using the Surf Finish Flowline toolpath with all the gouge checks turned off, and have tried almost every option I know.   I cannot get the tool to follow the surface...  Its leaving the amount shown in the attached picture.  Negative stock to leave gets into the surface.

Help Please 🤔

Undercut.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...