Tool path setup

[Mcfish]

We just switched from MC  '18 to '19.  Now my toolpaths just show a single line where the tool would enter a hole for instance.  Before, there would be a circle top and bottom relative to the size of the tool.  

 

It was very useful when toggling back and forth between a drill and reamer for instance, showing the two tool sizes in the same hole.  Was this a change, or is it a default that I'm not finding?  Thanks for any help.  

[nickbe10]

1 hour ago, Mcfish said:

It was very useful when toggling back and forth between a drill and reamer for instance,

I take it this is in back plot? There are a bunch of buttons in the top of the control dialog box. These display or turn off different components of the backplot.

[Mcfish]

It is.  I've tried all of them.  I hate updates.  

[JParis]

32 minutes ago, Mcfish said:

 I hate updates.  

Then get out of this business now...

This business is going through dynamic changes and things on all fronts are changing quickly..

If a person, noit you pre se, cannot deal well with change,they are already behind and will fall further so...

Good luck!!

[Mcfish]

You're right.  From here on out I'll love updates, changes, needy customers and Monday mornings.     

[jlw™]

Mcfish, this is an update and improved function.  It allows more control over your backplot appearance.  You can play with these settings to get what you want: