Arumatik block length

[Tim Johnson]

I'm starting the process of adding a Kitamura HX300iG horizontal to my post. On the programming warnings list there is a statement that there is a 39  character max limit per block. Can anyone tell me if this is a true statement or if only 39 characters will fit per line on the screen? It's bad enough that the Arumatik code doesn't contain the IF THEN statement but only 39 character blocks means major surgery.

[YoDoug®]

27 minutes ago, Tim Johnson said:

I'm starting the process of adding a Kitamura HX300iG horizontal to my post. On the programming warnings list there is a statement that there is a 39  character max limit per block. Can anyone tell me if this is a true statement or if only 39 characters will fit per line on the screen? It's bad enough that the Arumatik code doesn't contain the IF THEN statement but only 39 character blocks means major surgery.

That doesn't seem right, 5 axis moves with X**.**** for each axis is 40 characters. 

[Tim Johnson]

3 hours ago, YoDoug® said:

That doesn't seem right, 5 axis moves with X**.**** for each axis is 40 characters. 

I'm hoping that this is a Japanese translation issue.

[jlw™]

Maybe I'm crazy but I'd just try it and see.

[THEE THAINZ™]

2 hours ago, jlw™ said:

Maybe I'm crazy but I'd just try it and see.

Maybe????

[Tim Johnson]

I have a 50 character line on our Mazak millturn. Since both controls are Mitsubishi I think i'm going to be ok.