write protect of common #variable

[SANJAY SHARMA]

hi, we need to solution for write protect of common variable out value , we are using this variable tool parts life count , after getting alarm operator do the zero with changing the tools. we nee to lock the macro variable no.

Thanks regards

Sanjay

[nickbe10]

4 hours ago, SANJAY SHARMA said:

hi, we need to solution for write protect of common variable out value

You can usually block macro programs but locking variables could be problematic if the machine is using them. At the very least I think we would need the name of the control.

A little more clarity on what you are asking. What are you getting vs. what you want. Are you saying that you have a variable set up to count parts, but it causes an alarm? If you lock the variable how does it increment?

You will probably need to show more of the code.

Are you sure the variable isn't being used in a non custom macro?

[tryon]

Not sure but maybe another solution;

 

N100

#510=0

#3000=1(change drill, 13)

N200

#512=0

#3000=2(Change drill, 21)

Etc

[SANJAY SHARMA]

thanks for your reply.

what is the PMC parameter to protect variable manual data  input in variable no.

given concept will work well . i will try and confirm you.

N100

#510=0

#3000=1(change drill, 13)

N200

#512=0

#3000=2(Change drill, 21)

Etc