Mastercam to Vericut help

[JAMES GABEL]

I am having a problem with the mastercam to vericut.  I have jobs that are setup with different WCS's on one part.  This way I hjave one program for all sides.  When I run the vericut chook to set it up in vericut I do not know all the setting to use in the chook.  I tried it and the model comes in one way and the tool comes in another.  I know this is my doing but I can not find the right combination.  Any help would be appreciated. 

[motor-vater]

you have to set up the Work offsets in Vericut. a CYS (I think thats what its called) and a Work offset that relates to that CYS. Its kinda hard for me to explain, but if I can grab some screen shots tomorrow I will. Also if you will have to move the CYS from where top top top is to where ever your new WCS is.... Colin has some videos on Eappentace that are probably gonna be 5 million times more helpful to you.. Just saying

[David Colin]

To orient your models (stock/fixtures/design) correctly on your vericut machine table, you need to make a Mastercam plane equals to your Vericut machine template's attach component plane. Select this plane in chook to export models correctly.

  

[#Rekd™]

This is just a simple 3 axis setup. WCS created for the Vice&Jig. Tools and holders are defined in Mastercam. If you are on maintenance the tech support at CG Tech is excellent! They will help you solve any problems.