Swarf Depth

[hot_chip]

Anyone know what happened to the "distance above lower rail" setting to control my swarf depth? I need to have my cutter tip below the lower rail to mill a chamfer. What's the new and improved way that I can't find for the life of me?

[crazy^millman]

It is there. If all else fails go back to the old school one through the Operations manager and right click and Mill toolpaths/multi axis/pattern/swarf.

[cam-eleon]

For the old school swarf it's under the collision control- Distance above lower rail (use +/-). For the new "Swarf Milling" toolpath I believe it's under Multi Cuts and then set the tool shifts to constant and then enter a value in the "To" field. I's been a while since I used the newer swarf but I think that's what does it...Try it out

[rothypnotic]

On 4/29/2019 at 6:33 PM, cam-eleon said:

For the old school swarf it's under the collision control- Distance above lower rail (use +/-). For the new "Swarf Milling" toolpath I believe it's under Multi Cuts and then set the tool shifts to constant and then enter a value in the "To" field. I's been a while since I used the newer swarf but I think that's what does it...Try it out slope game

Swarf has got newer versions and I think it works fine.