Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Partial flow edge error detected


So not a Guru
 Share

Recommended Posts

1 hour ago, So not a Guru said:

All of the surfaces flow in the same direction, on this one.

i am not too sure then, maybe try the single row only setting on cut pattern, if you cant get the flowline to work you can probably get the Blend toolpath to flow in the correct way.

Link to comment
Share on other sites
1 hour ago, jlw™ said:

What path Zeke?  I've found that blend will cover a lot where flowline will not.  I also see this in the advanced rotary and usually creating a new cylinder surface will correct it.

It was on a 5X flowline. I used another path, I don't remember which off hand.

I was really just trying to determine what, exactly, causes the error.

It was an aerospace part, so most likely it was a bad model. I usually just create new geometry, but i didn't have the luxury of time, so I just changed course & moved on.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...