saftey zone problem

[motor-vater]

anybody else have issues in 2019 with the safety zone tab in swarf5axis? it will let me select geometry to make a boundary but gives me no access to the menu for turning it into a cylinder or adjusting sizes etc? am I doing it wrong or is it a bug???

[Slepydremr]

Mine seems to be working. After I finish selecting the geometry I can then select which type of boundary I want.

I have to click the "End Selection" button first. Then I have the different options.

[motor-vater]

Not so much for me. I select the part, it creates a box, I end selection and the setting screen looks like it is wide open but it is completely unresponsive.. wont even let me click the check mark to accept the box it created. I have to esc out of it all together... Weird but I have seen this alot, Maybe it has something to do with this being a Horizontal and locking it into 4 axis mode Top, Front, Front.... either way I work around it just an annoyance...

[motor-vater]

so I got it to work, strangly it has something to do with my 3rd screen. I keep my dialog boxes/managers on the 3rd screen to give me more space on my main screen. Oddly enough as soon as I re-docked my managers it works.... Kinda crappy but I'll take it.... 

[MadPickinSkills]

Mine was doing the same thing. Thanks for the work around

On 5/1/2019 at 2:20 PM, motor-vater said:

so I got it to work, strangly it has something to do with my 3rd screen. I keep my dialog boxes/managers on the 3rd screen to give me more space on my main screen. Oddly enough as soon as I re-docked my managers it works.... Kinda crappy but I'll take it.... 

 

[Jayson Kramer]

We have seen issues were at time on a multi screen were certain tabs may not work correctly if undocked to another screen.

Have you downloaded the B5 2020 and tried it there with that file?

[Aaron Eberhard]

Just saw this..  We have this in the system as D-35180, it was just reported to us a few months ago, surprisingly.  It affects all versions with the panel interface (2018, 19, 20).   It's on the list