Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Chip Trap


Recommended Posts

^^ Yup and also you can add the Scratch Bright  in fine med or others for a added parts catcher / filter system for the fines  and those little parts that are hard to find when they get parted off and go somewhere else other than were you wanted them to go . Its makes the Easter egg hunt a little easier.

That Is for the lathe but in the drop tray on the haas works also.

:cheers:

  • Like 1
Link to comment
Share on other sites
  • 3 weeks later...

So a few  weeks in use and I would give it a big  :thumbsup:. The amount of tiny chips floating in the coolant has dropped almost to nothing. Can slide it out from under the drainage chute easily without moving the coolant tank. Cheap enough that it is well worth the cost. Still running the first 2 filters so the life on them is pretty good and they are not expensive to begin with.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...