Convert NetHasp to CodeMeter

[MikeN19]

Hello,

My apologies if this is not the correct area for this question. I am a new IT tech for a local college, we are currently using Mastercam 2019 with NetHASP license server. I've been tasked with converting it from NetHASP to CodeMeter and it's not working. I have installed CodeMeter, configured it with the server's IP address and enabled access. CodeMeter Control Center is not showing any licenses (according to the administration guide, I thought it would automatically recognize the license we're currently using). I am a bit at loss, and I am hoping that you guys would be able to help point me in the right direction on how to convert this license server from NetHASP to CodeMeter. I was told that I might need to adjust the license but not sure what needs to be adjusted or if that's even possible, so any help you could give me, I would greatly appreciate it. 

Please let me know if you have any questions or want me to clear anything up.

 

Thank you,

 

Mike 

[gcode]

I didn't even know such a thing could be done

Your best bet would be to contact the dealer who services your account or qc_at_mastercam.com

[MikeN19]

Ok, thanks for your help, gcode!