Bandy

Cutter violates part geometry W/2-dHS, and Surfacing

Recommended Posts

Parts are correct in Mastercam verify, Mastercam backplot, and Mastercam Machine simulations. Cutter violates part geometry W/2-d HS toolpaths, and Opti-rough Surfacing toolpaths. Posted code has endmills running through the part. Would try to ramp into the cut with a 93.0" radius, the remedy of which was to turn of  filtering (100.0 max radius default setting). Never had this issue before, and why would it gouge the part?  Gouges look like circular lead-ins, or HSTP leads. This is a recent development, coinciding with latest 2019 update installation. Post is for a Doosan MV6030. Any ideas or similar issues?????

Share this post


Link to post
Share on other sites

My idea from that, is that I should not have updated to 2019! nor u by the looks of it.

Share this post


Link to post
Share on other sites
1 hour ago, Bandy said:

Posted code has endmills running through the part.

if u using min. distance, there is a recent thread u should see.,,

search minimum distance.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us