Mastercam not posting to extended haas offsets

[KLP1190]

I am having an issue with posting a program in mastercam. I am running a haas horizontal mill and need to post to my extended offsets; g154 p1, g154 p2... etc. My boss and I use the same post and his will output to the correct offset, mine posts out g110, g111, g113. Is there a setting I need to change to make this work properly?

[JParis]

It doesn't sound like you're both using the same posts...

I suggest getting a copy of his directly from him

[Matthew Hajicek - Singularity]

Unless there's a misc integer setting that controls how the offsets are posted?

[JParis]

12 minutes ago, Matthew Hajicek™ - Conventus said:

Unless there's a misc integer setting that controls how the offsets are posted?

Possible, I "assumed" they've at least talked about it, so hopefully on that, they're on the same page

[KLP1190]

misc integer is set to post values on his pc and mine. I will have to get his post next week to see if that fixes it. Thank you both for your input. Much appreciated.

[civiceg]

G110 (Older Haas) =G154P1 (Newer Haas)

 

Newer machines are backwards compatible. It will work, just confuses people. 

 

See if your post has this line, depends on the version.

extoffset    : 1     #Extended workoffsets Output Type; 0 outputs G110-G129; 1 outputs G154 P1-P99

 

[nickbe10]

On 6/21/2019 at 1:19 PM, civiceg said:

Newer machines are backwards compatible. It will work, just confuses people. 

Yep, I have all my posts based on MPMASTER but for my Haas posts I went into the CNC HAAS generics and carefully moved  Haas specific stuff to my custom post ,HAAS Peck Drill is another that comes to mind.

[zachlancy]

Try changing this to a 1. The offset call in the post calls on this to determine whether or not to use g154 or g110