Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam post-processor migration/update


Recommended Posts

Your Mastercam dealer should be your first point of contact for this problem

He should be able to provide you with a modern Siemens post at no charge as there is one available

on the Tech Exchange at Mastercam.com

Link to comment
Share on other sites
On 7/8/2019 at 7:41 PM, gcode said:

Your Mastercam dealer should be your first point of contact for this problem

He should be able to provide you with a modern Siemens post at no charge as there is one available

on the Tech Exchange at Mastercam.com

Okay I see now, if there is free one available, that should also be fine, no need to migrate this file.

Thanks for the info, didn't now that.

😉

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...