Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

model in verify is very coarse looking


Doug Funny
 Share

Recommended Posts

Yes the Shared mastercam folder C:\Users\Public\Documents\shared Mcam(current version) there is a file called MastercamSimulatorDefaults if you open it with a text editor you will see a value next to the words precision factor that is 1. Set it to between 1 and five depending how much precision you want, keep in mind this will affect your performance.

Link to comment
Share on other sites

that shouldnt be a problem, so just to recap for best results your precision index should be at 10 with a precision factor of 5 turbo mode should be off if the graphic still isn't good at that point it could just be your graphics card

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...